





















Firm Ground Soccer Cleats
Firm Ground applies to a natural short-grass surface that is firm underfoot but may be slightly wet. Firm Ground (FG) studs are designed specifically for this playing surface and offer acceleration, comfort and enhanced traction, dispersing stud pressure evenly across the foot.
- Ideal for firm, dry, natural grass surfaces
- Designed for acceleration, comfort and enhanced traction
- Usually moulded and conical or bladed in shape










For the best result, you need a piece of paper, tape to attach it, a pencil, a pair of socks similar to what you would use in your boots/shoes and a ruler. Then follow the guide below.
Step 1Put a white piece of paper against the wall on a hard surface. Place your foot so the heel follows the edge of the paper.

Mark the length of you foot, at the longest point, with a pencil and measure both feet as there may be a difference.

Then measure the difference from the bottom of the paper to where you have measured both feet and write down the longest length.

The most precise measurments are when we have measured the boots. When we have done that, it is shown like this.

For childrens football boots we don\'t recommend; as it goes for regular footwear, that you add growth room for up to 1.5 cm, but instead around 0,5 - 1 cm as the size in general needs to fit right away.
-
Review by Shannon Boudreaux
(Posted on 8/3/2020)
-
Review by Krystal Alkire
(Posted on 8/2/2020)
-
Review by Felix P
(Posted on 8/1/2020)
-
Review by Chris Cronk
(Posted on 8/1/2020)
-
Review by Zane Bodin
(Posted on 8/1/2020)
-
Review by Kiin Choi
(Posted on 8/1/2020)
-
Review by Nadir Terruzzi
(Posted on 8/1/2020)
-
Review by Dougie Thoms
(Posted on 8/1/2020)
If you are not happy,simple email us and return it within 30 days.we will fully refund your purchase.
Your happiness is our #1 priority. Whatever it takes. We’re here for you.
Find a better price within 7 days of your purchase and we’ll match it.



