Artificial Grass Soccer Cleats
Artificial Grass surfaces (also known as an all-weather surface) usually consists of 3G (rubber crumb) or 4G (longer pile, combination of rubber/sand infill, more realistic to actual grass) and often includes Astro Turf (water or sand-based).
Boots made for Artificial Grass (AG) will be specifically designed for the extra abrasion associated with synthetic grass. Usually featuring more numerous and densely concentrated studs, sometimes they may vary in height for improved traction and be hollowed out to reduce weight and enhance cushioning.
- Ideal for any variant of an artificial grass surface
- Designed for acceleration, comfort, enhanced traction and weight reduction
- Usually moulded and conical, bladed or hollow in shape
For the best result, you need a piece of paper, tape to attach it, a pencil, a pair of socks similar to what you would use in your boots/shoes and a ruler. Then follow the guide below.Step 1
Put a white piece of paper against the wall on a hard surface. Place your foot so the heel follows the edge of the paper.
Mark the length of you foot, at the longest point, with a pencil and measure both feet as there may be a difference.
Then measure the difference from the bottom of the paper to where you have measured both feet and write down the longest length.
The most precise measurments are when we have measured the boots. When we have done that, it is shown like this.
For childrens football boots we don\'t recommend; as it goes for regular footwear, that you add growth room for up to 1.5 cm, but instead around 0,5 - 1 cm as the size in general needs to fit right away.
If you are not happy,simple email us and return it within 30 days.we will fully refund your purchase.
Your happiness is our #1 priority. Whatever it takes. We’re here for you.
Find a better price within 7 days of your purchase and we’ll match it.